Production Noise Immunity (PNI)
This module is based on the Production Noise Detection of the QC Standard System. Corrupted measurements are repeated automatically while valid parts of each measurement are storedand merged together, eventually providing valid results.
Ordinary techniques like a simple repeat approach, where the signal is repeated until one completely undisturbed test finishes, or averaging, which impairs sensitivity, do not solve the problem. In contrast the unique splicing technique ensures full production noise immunity while maintaining full sensitivity even if each single measurement is corrupted.
- Automatic repeating and merging technology
- Highest test speed in noisy environment
- Separates defects from noise
- Extension of production noise detection
Driver testing It is recommended to place the measurement microphone in a test enclosure and to operate the drive unit in a test frame firing into the box. The attenuation of the ambient noise is limited by the cone of the loudspeaker system to 5 .. 20 dB, rising to higher frequencies. This shielding is helpful but NOT sufficient to do reliable testing in a noisy production environment where high sound pressure peaks cannot be avoided. In conventional test systems, ambient noise will be interpreted as a defect drive unit and will reduce the yield rate. Additional housing of the test station and transporting the drive units into a more silent test environment is expensive and not practical in most cases.
The NI option ensures that Rub&Buzz problems which occur at low levels (40 .. 80 dB below the fundamental) can be reliably separated from ambient noise disturbances.
By exploiting the extremely short measurement time of Klippel QC, repetitions do not degrade the overall measurement time too much.
Loudspeaker System in sealed test chamber
Completely sealed test enclosures are also very beneficial for testing smaller loudspeaker systems (e.g. for multimedia). Here the loudspeaker system and the test microphone are located inside the test enclosure. Although this shielding provides good attenuation (between 20-30 dB), high peak values of ambient noise corrupt conventional measurement techniques. The second ambient noise microphone and the algorithms used in Noise Immunity ensure full sensitivity for rub and buzz defects, loose parts and air leaks.
System Testing in a semi-open box
The measurement of large loudspeaker systems (e.g. professional loudspeakers) requires large test enclosures, which are expensive and require production space. Placing the test object into the enclosure requires special means and time.
The handling can be significantly simplified by using a semi-open test enclosure, which is placed close to the assembling line. This arrangement gives about 10..20 dB of attenuation at higher frequencies. Conventional measurement techniques without ambient noise immunity are prone to invalid results and require high limit values, which reduces the sensitivity of the measurement.
System Testing in free air
If no large test enclosure and no means providing additional acoustical shielding are available, the ambient noise immunity becomes more and more important in identifying invalid measurements. It is important to place the test microphone as close as possible to the drive units. For testing large speakers using multiple drive units and for checking air leaks in the enclosure, multiple microphones multiplexed by the measurement system are recommended. While performing a long test sequence required for complex systems (e.g. surround sound system), a repetition of a complete test is not efficient in the case that a single test step failed due to ambient noise. The NI option only repeats the corrupted task and ensures a valid overall test.